Refrigerator
Original shape 01. I got adventurous and refilled the door with expanding foam. Mediocre results but it does work.
Original shape 02.
Original shape 03.
Original shape 04.
Original shape 05.
Original shape 06.
Original shape 07.
Original shape 08.
Original shape 09.
12V or Propane - Original shape 10.
Added screen to keep out the bugs on both the lower and upper vents.
Insulated and install of fans started.
Another angle 01.
Another angle 02.
Another angle 03.
Added 2 fans, controlled at the Dashboard via to rocker switches to facilitate cool down time
Mounted and wire to a terminal block before routing to the Dashboard area where they land on 2 different rocker switches.
I added an inner shroud at the BLUE line angling upwards and into the base of the cooling coils so that while the fans are pushing out air the flow will be diverted up through the cooling coils before exiting the space
Shroud secured. As refrigerator was installed I was able to angle it into place.
Cheap computer fan.
Replaced both vents along with screen to prevent critters getting in.
I insulated the space with 1/2” foam board and taped it up as best as possible.
I added a sheet metal diffuser to force air flow up into the coils of the fridge and put 2 fans at the top of the space to push the hot air out.